It is shown that the interaction of carbon materials with Si lead to the rapid thermal release during the siliconization process. As a result high thermal stresses induced can result in cracks initiation in siliconized blanks. Manufacture of defect-free blanks is also dependent on the impurities content in raw materials.
gravity, structural components, micro texture parameter, prismatic plane, the base plane
1. Pyzalski M., Bialoskorski J., Walasek E. Reaction between carbon fibres and molten silicon: heat determination using DTA // J. Therm. Analysis. - 1986. - Vol. 31. - P. 1193-1196.
2. Bialoskorski J., Pyzalski M., Walasek E. Studies of the reaction between the amorphous carbon and silicon // J. Therm. Analysis. - 1990. - Vol. 36. - P. 2033-2036.
3. Mortensen A., Hodaj F., Eustathopoulos N. On thermal effects in reactive wetting // Scripta Materialia. - 1998. - Vol. 38, no. 9. - P. 1411-1417.
4. Einset E. O. Analysis of reactive melt infiltration in the processing of ceramics and ceramic composites // Chem. Eng. Sci. - 1997. - Vol. 53, no. 5. - P. 5191-5198.
5. Reaction-bonded silicon carbide by reactive infiltration / P. Sangsuwan, J. Orejas, J. E. Gatica [et al.] // Ind. Eng. Chem. Res. - 2001. - Vol. 40. - P. 5191-5198.
6. Messner R. Formation kinetics of reaction bonded silicon carbide based materials. PhD dissertation. Massachusetts Institute of Technology, USA. - 1991. - 142 p.
7. Singh M., Behrendt D. T. Studies on the reactive melt infiltration of silicon and silicon-molybdenum alloys in porous carbon // NASA Technical Memorandum 105860. - Lewis Research Center. - 1992. - 11 p.
8. Vliyanie primesey na kachestvo silicirovannyh grafitov tipa SGP / Yu. I. Koshelev, V. I. Kostikov, E. M. Tatievskaya [i dr.] // Adgeziya rasplavov i payka materialov. - 1991. - № 25. - S. 90-94.
9. Fazoobrazovanie v processe stareniya kremneuglerodnogo kompozicionnogo materiala / V. A. Tyumencev, Sh. Sh. Yagafarov, A. A. Fotiev [i dr.] // Zhurnal neorganicheskoy himii. - 1991. - № 7. - S. 1874-1876.
10. Gnesin G. G. Karbidokremnievye materialy. - M.: Metallurgiya, 1977. - 216 s.
11. Effect of alloying elements on carbon solubility in liquid silicon equilibrated with silicon carbide / K. Yanaba, Y. Matsumura, T. Narushima [et al.] // Mater. Trans. JIM. - 1998. - Vol. 38, no. 8. - P. 819-823.
12. Fazovye i strukturnye prevrascheniya v uglerodnyh materialah, soderzhaschih kremniy / E. S. Shmakova, Yu. N. Lebedev, Yu. I. Mihin [i dr.] // Konstrukcionnye materialy na osnove ugleroda. M.: Metallurgiya, 1976. - S. 38-46.
13. Ocenka vozmozhnosti primeneniya uglerodnogo napolnitelya dlya izgotovleniya silicirovannyh izdeliy / I. A. Bubnenkov, Yu. I. Koshelev, O. Yu. Sorokin [i dr.] // Novye ogneupory. - 2011. - № 12. - S. 32-37.
